Audiometric Booth Application

The Audiometric Booth is a type of medical clinic. When performing hearing detection, it is required to be in the Audiometry room in order to achieve an ideal listening environment.

1.The Audiometric Booth is entirely suspended and has no steel connection to the original wall.

2.According to the environment around the Audiometric Booth and the acceptance criteria (GB/T16403, GB/T 16296 or user-specified standard) adopted by the Audiometry room, the audiometry

The wall of the room is generally multi-layered. At present, steel plates, aluminum plates, wood boards, damper plates, aluminum-plastic plates and various sound absorbing materials are used.

Can choose sound absorption materials with good sound absorption performance.

3.The Audiometric Booth must be equipped with a ventilation system. Conditional introduction of air conditioning into and out of the air, ventilation and air conditioning inlet and outlet should be silenced to avoid introducing external noise.

4.All the Audiometric Booth are made of environmentally-friendly materials (steel, insulation (sucking) sound shielding materials), and they can be put into use after installation.

5.The soundproof door to be configured in the Audiometry room is generally steel structure, and a sealing strip is installed on the door panel or the door frame to better seal the outside and prevent external noise transmitted.

Scope of application

☆ Pure-sound hearing test for disease prevention and control center and occupational disease prevention and treatment center;

☆ Hearing test room for hearing diagnosis center of major hospitals;

☆ The hearing room of the otolaryngology hearing and hearing diagnosis and treatment room of the hospital outpatient department;

☆ CDC, occupational defense system hearing screening room;

☆ Auditory room and electronic hearing measurement room of research institutes such as Bioacoustics Research Institute.